Price list to give you an idea of costs

---

This was a respray to frame and fork, so £525 for that.

Masking to bands and logos 2.5 hours £150

Respray to frame and fork, so £525 for that. 

Masking to bands 3 hours £180

Multiple colours/sprays £100

Logo to headtube 1.5 hours £90

Stickers to top tube 0.5 hours £30

Dismantling of bike £60

Single colour spray to frame & fork £525

Masking for stripes £150

Spraying for additional colours £75

Logo to downtube £90

Rebuild bike 3 hours £180

This is for a frameset, in a single colour i.e. frame & fork. 

Logos would be extra. See below.

Assumes that all components have been removed. If there's the odd bit you can't remove we can do that for you. May be an extra charge for this (see below).

All metal frames will be grit blasted, primed, base coated, and then lacquered, before polishing to give it a shine. 

See below for info on carbon frame prep.

As for a frame set, but this is for the frame only i.e. no fork. 

Same as the others, but just for a set of forks. 

Hardtails I do for the same price as a road type frame, but full sussers are a bit more expensive because of the back end. Assumes that frame is dismantled, and bearings etc have been removed, and doesn’t include the fork.

I don’t make any money on these, but they’re fun to do. Perfect for hand-me-down bikes. And why not let your kid come up with a design. I can’t promise to match it exactly, but I’ll certainly use it for inspiration.

Every frame is different. Some techniques are easier than others. Masking takes a long time. Spraying a fade less so. Tell us what you’re after and we’ll tell you how much time is involved. 

Logos also done on an hourly rate. For info a single colour downtube and headbadge would be around £150. More time if we need to create an image to work from.

Chromacoat paint is colour changing depending on the angle you look at it. It is a bit more expensive, and needs to be applied over a basecoat, usually black. It’s amazing stuff though, and there are quite a few colour combinations available. It is a bit more expensive than standard paint though.

If you’ve chipped or scratched your frame we may be able to help. Cost varies depending on the amount of work involved, so drop us a line with some photos of the damage and we’ll give you a quote. Fixing a chip is a minimum of 3 hours work so prices start at £180.

When needed we can colour match paint for your custom respray or for touchups to existing paint. 

Prep to a carbon frame varies, and needs to be done by hand.. Because of the larger rounder tube shapes it’s not always necessary to remove all the existing paint. It’s possible to get away with just making sure the surface is smooth and flat. This could be anywhere from an hours work, to 2 or 3. 

Removing all the paint from a carbon frame could be 5-6 hours. Or more. The most I’ll charge is £250 for a standard frame though. £350 for a full suss mtb frame. Fiddly as!

Simple or complicated. Lots of masking either way to deal with all the vents, so you’re looking at £225 upwards. 

If you need your bike dismantling and rebuilding after painting we can do that for you. 

Cost varies depending on the setup of the bike, and it's condition. Generally looking at half an hour to an hour for dismantling. 2-3 hours for rebuilding. Internal cabling takes a bit longer. As does removing seized components. This is also the rate for any mechanical work.